As I'm now committed with the Lexus GS450h conversion I want to sell some of the stuff I have purchased along the way and with too much enthusiasm that I won't have use for in the near future.
Cheap shipping can be organized for Baltics, Poland, Germany, Belgium, Holland and UK south-east (there are some restrictions).
Prius Gen 2 inverter 170 EUR (I'll throw in inverter control connectors + assembled control board + blue pill + wifi interface).
Auris inverter - 150 EUR
Auris control board from Damian has connectors soldered on it but the -5V power supply is fried (need to order replacement probably from lcsc as the european/american suppliers don't have it), not tested 250EUR (take both inverter and board for 350EUR)
RAV 4 IV inverter - 220 EUR (this is the AWD version so has 3 inverters in it)
Prius Gen 4 inverter - 240 EUR
Gen 4 transaxle (P610 from a C-HR, has Air Conditioner power cable as well) - 244 EUR
C-HR driveshafts left and right - 170 EUR
Lexus MGR - 108 EUR (has the phase wire connector intermediate piece missing, I might have the matching drive shaft(s) as well)
MGR Cable harness (phase wires, resolver, temperature sensor, HV and 12V + bunch extra) - 150EUR
These prices are what they cost me.
Photos coming soon.
Garage clear out
-
rstevens81
- Posts: 377
- Joined: Sun Dec 22, 2019 10:36 am
- Location: Bristol, UK
- Has thanked: 29 times
- Been thanked: 111 times
Re: Garage clear out
im interested in the Lexus mgr
Rule 1 of EV Club is don't buy a rust bucket....
Which rule does everyone forget
Which rule does everyone forget
-
MattsAwesomeStuff
- Posts: 1013
- Joined: Fri Apr 26, 2019 5:40 pm
- Has thanked: 390 times
- Been thanked: 258 times
Re: Garage clear out
TheSilverBuick has been looking for someone to sell him a Prius Gen 2 blue-pill board now that Damien's sold out and isn't running more boards.
He already has an inverter (and I presume it would cost more to ship yours than it is worth). I pointed him to this thread.
viewtopic.php?p=13129#p13129
He already has an inverter (and I presume it would cost more to ship yours than it is worth). I pointed him to this thread.
viewtopic.php?p=13129#p13129
-
TheSilverBuick
- Posts: 187
- Joined: Mon Jun 08, 2020 5:01 pm
- Location: Nevada, United States
- Has thanked: 3 times
- Been thanked: 2 times
Re: Garage clear out
Thank you Matt. Are you able to provide a purchase and shipping quote to the United States. Sparks, Nevada 89436? As Matt mentioned, I'm looking for a Gen2 inverters control board.
Need to learn. Starting from the basics.
-
jnsaff
- Posts: 179
- Joined: Fri Oct 18, 2019 7:42 am
- Location: Tallinn, Estonia
- Has thanked: 3 times
- Been thanked: 8 times
Re: Garage clear out
I have 4 unpopulated gen2 Damian boards I had made by JLC when I fuxx0red my first one. I can send one or more of them for say $5 plus shipping each.
-
TheSilverBuick
- Posts: 187
- Joined: Mon Jun 08, 2020 5:01 pm
- Location: Nevada, United States
- Has thanked: 3 times
- Been thanked: 2 times