All public logs

Combined display of all available logs of openinverter.org wiki. You can narrow down the view by selecting a log type, the username (case-sensitive), or the affected page (also case-sensitive).

• 20:22, 17 February 2020 Joromy talk contribs created page CAN table CAN STD (Not much) Tag: Visual edit
• 20:00, 17 February 2020 Joromy talk contribs created page Introduction CAN STD (Created page with "This is an attempt to get all openinverter hardware to follow a standard on their CAN bus communication. Since there is priority in the CAN bus data, it's important to have a...")
• 19:45, 17 February 2020 Joromy talk contribs created page Introduction (Created page with "This is an attempt to get all openinverter hardware to follow a standard on their CAN bus communication. Since there is priority in the CAN bus data, it's important to have a...")
• 00:04, 24 December 2019 Joromy talk contribs created page Support forum Tesla (Created page with "Support for these boards will be provided via the OpenInverter forum and a full body documentation will be built up here on the Wiki over time.")
• 00:02, 24 December 2019 Joromy talk contribs created page Where to buy Tesla (Created page with "Fully built and tested and bare PCB boards are available from the EVBMW webshop : http://www.evbmw.com/index.php/evbmw-webshop")
• 00:00, 24 December 2019 Joromy talk contribs created page Files Tesla (Created page with "In keeping with the open source philosophy, all designs including full schematics, pcb layouts, BOMs and Gerber files can be found on Github : https://github.com/damienmaguire")
• 23:58, 23 December 2019 Joromy talk contribs created page Introduction Tesla (Created page with "Currently, there are two boards available designed specifically to run the drive units found in the Tesla Model S and Model X electric vehicles. The Large drive unit (LDU) log...")
• 23:31, 23 December 2019 Joromy talk contribs created page Modifications to original wiring (Created page with "MODIFICATIONS: (Please read the other Ford Ranger treads, for details) Replace temp sensor in inverter Reuse old connector in inverter ECU One new wire, from backup light to i...")
• 20:44, 23 December 2019 Joromy talk contribs created page Schematics and connector pinout (Created page with "[https://openinverter.org/forum/download/file.php?id=999 joromy_tim_w_GND_fill_15b - Schematic.pdf]") Tag: Visual edit
• 17:18, 23 December 2019 Joromy talk contribs moved page Features new TIM to Introduction TIM
• 17:09, 23 December 2019 Joromy talk contribs created page Features new TIM (Created page with "The new ECU for the Ford Ranger TIM (traction inverter module) is based on the openinverter V2 board. It uses the original power eletronics, IGBT drivers, current sensors and...")
• 19:31, 2 October 2019 User account Joromy talk contribs was created automatically