Leaf stack with zombiverter: Difference between revisions
Jump to navigation
Jump to search
(Created page with "setting up a leaf stack with the zombiverter VCU the full leaf stack ( motor/inverter, pdm (charger, dcdc, hvjb)) can be controlled with the zombieverter VCU wiring the zombiverter to the leaf harness") |
mNo edit summary |
||
| Line 1: | Line 1: | ||
setting up a leaf stack with the zombiverter VCU | === setting up a leaf stack with the zombiverter VCU === | ||
the full leaf stack ( motor/inverter, pdm (charger, dcdc, hvjb)) can be controlled with the zombieverter VCU | |||
the | all you need is 12v and CANbus | ||
== wiring == | |||
=== wiring the zombiverter to the leaf harness === | |||
[[File:Leaf resolver pinout.png|thumb|em57 resolver pinout]] | |||
the motor/inverter and PDM each use there own canbus | |||
wire canbus1 to the motor/inverter | |||
wire canbus2 to the pdm | |||
[[File:Leaf inverter pinout.jpg|thumb|leaf inverter connector pinout]] | |||
then select them accordingly in the zombiverter web interface | |||
[[File:PDM PINOUT.png|thumb|pinout of the pdm]] | |||
Revision as of 05:32, 24 October 2023
setting up a leaf stack with the zombiverter VCU
the full leaf stack ( motor/inverter, pdm (charger, dcdc, hvjb)) can be controlled with the zombieverter VCU
all you need is 12v and CANbus
wiring
wiring the zombiverter to the leaf harness
the motor/inverter and PDM each use there own canbus
wire canbus1 to the motor/inverter
wire canbus2 to the pdm
then select them accordingly in the zombiverter web interface
