Leaf stack with zombiverter: Difference between revisions
Jump to navigation
Jump to search
No edit summary |
|||
| Line 12: | Line 12: | ||
wire canbus2 to the pdm | wire canbus2 to the pdm | ||
then select them accordingly in the zombiverter web interface[[File:ZombieVerter VCU V1 cable side pinout2.jpg|thumb|zombiverter pinout|left|602x602px]] | |||
[[File:Leaf inverter pinout.jpg|thumb|leaf inverter connector pinout]] | [[File:Leaf inverter pinout.jpg|thumb|leaf inverter connector pinout]] | ||
[[File:PDM PINOUT.png|thumb|pinout of the pdm]] | [[File:PDM PINOUT.png|thumb|pinout of the pdm]] | ||
[[File:Leaf resolver pinout.png|thumb|em57 resolver pinout]] | [[File:Leaf resolver pinout.png|thumb|em57 resolver pinout]] | ||
Revision as of 16:15, 24 October 2023
setting up a leaf stack with the zombiverter VCU
the full leaf stack ( motor/inverter, pdm (charger, dcdc, hvjb)) can be controlled with the zombieverter VCU
all you need is 12v and CANbus
wiring
wiring the zombiverter to the leaf harness
the motor/inverter and PDM each use there own canbus
wire canbus1 to the motor/inverter
wire canbus2 to the pdm
then select them accordingly in the zombiverter web interface
