Leaf stack with zombiverter

setting up a leaf stack with the zombiverter VCU

the full leaf stack ( motor/inverter, pdm (charger, dcdc, hvjb)) can be controlled with the zombieverter VCU

all you need is 12v and CANbus

wiring

wiring the zombiverter to the leaf harness

em57 resolver pinout

the motor/inverter and PDM each use there own canbus

wire canbus1 to the motor/inverter

wire canbus2 to the pdm

leaf inverter connector pinout

then select them accordingly in the zombiverter web interface

pinout of the pdm