Leaf stack with zombiverter

setting up a leaf stack with the zombiverter VCU

the full leaf stack ( motor/inverter, pdm (charger, dcdc, hvjb)) can be controlled with the zombieverter VCU

all you need is 12v and CANbus

wiring

wiring the zombiverter to the leaf harness

the motor/inverter and PDM each use there own canbus

EV SYSTEM CAN-H (pin14) to CAN EXT H (pin 28)

EV SYSTEM CAN-L (pin15) to CAN EXT L (pin 27)

zombiverter pinout

leaf inverter connector pinout

pinout of the pdm

em57 resolver pinout