Mitsubishi Outlander CAB300 current sensor

From openinverter.org wiki
Revision as of 16:05, 19 January 2025 by Arber333 (talk | contribs) (Created page with "LEM CAB300 C/SP2 Current sensor {| class="wikitable" |thumb|Outlander current sensor |thumb|CAB300-C SP2 characteristics |thumb|Current sensor CAN report |} CAN protocol CAN bus report is fixed at 500kbps To start or stop communication it uses ID 0x6F0 in notextended(standard) frame - single signal. Signal is 8 byte long byte1 value 0x28 will stop CAN and 0x2...")
(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)
Jump to navigation Jump to search

LEM CAB300 C/SP2 Current sensor

Outlander current sensor
CAB300-C SP2 characteristics
Current sensor CAN report

CAN protocol CAN bus report is fixed at 500kbps To start or stop communication it uses ID 0x6F0 in notextended(standard) frame - single signal. Signal is 8 byte long byte1 value 0x28 will stop CAN and 0x29 will start communication.

Current report is in ID 0x3C2 in standard frame 8 bytes zero center at 80000000H = 0mA 1mA = 80000001H -1mA = 7FFFFFFFH

byte0 = error indication (0 - normal, 1 - error) byte7 to byte1 is the value to calculate

CAB300 connector, which is CAB500 connector as well: 4P Female P/N 1473672-1 Pins Female Crimp 1123343-1 https://www.aliexpress.com/item/1005004210302153.html?spm=a2g0o.order_list.order_list_main.385.60b81802QTc3l6

Retrieved from "https://openinverter.org/wiki/index.php?title=Mitsubishi_Outlander_CAB300_current_sensor&oldid=5503"