I am working on getting a Tesla SDU motor running and I may have fried the voltage regulator when testing the board.
I was looking to find a new one to replace it but I am having difficulty finding the exact voltage regulator for IC12. The pinout seems to differ from what is referenced on the most recent v6 schematic which calls for the LM2596S-5.0_NOPB. This voltage regulator has a different pin set than what is on the v8 board.
I am curious if anyone knows what the part number is for this voltage regulator? I am also curious if there is a v8 schematic that could be used to reference parts and traces for future troubleshooting?
Thank you
Voltage Regulator for v8 SDU logic board
-
Justin5689
- Posts: 1
- Joined: Mon Aug 07, 2023 7:12 pm
- Has thanked: 1 time
Voltage Regulator for v8 SDU logic board
You do not have the required permissions to view the files attached to this post.
-
johu
- Site Admin
- Posts: 6772
- Joined: Thu Nov 08, 2018 10:52 pm
- Location: Kassel/Germany
- Has thanked: 385 times
- Been thanked: 1594 times
- Contact:
Re: Voltage Regulator for v8 SDU logic board
In the latest BOM it's this: https://jlcpcb.com/partdetail/RichtekTe ... 9GE/C16819
Support R/D and forum on Patreon: https://patreon.com/openinverter - Subscribe on odysee: https://odysee.com/@openinverter:9
-
royhen99
- Posts: 262
- Joined: Sun Feb 20, 2022 4:23 am
- Location: N. Wiltshire. UK
- Has thanked: 22 times
- Been thanked: 133 times
Re: Voltage Regulator for v8 SDU logic board
V8 schematic and BOM here https://github.com/jsphuebner/Tesla-Fro ... /master/V8