Wanted set of 6 BMW phev bms slaves

[Ev8]

As above, looking for a set of 6 bmw phev bms slaves from the 9kwh 6 module battery, I have plenty from the 5 module pack but in order to add a 6th to my current 5s pack I need modules from the 6s pack so I don’t double up of can addresses

[tom91]

Are you looking for the Gen 1 slaves? You can renumber the Gen 1 can only slaves, renumbering code is in the SimpBMS code.

https://github.com/Tom-evnut/BMWPhevBMS ... hevBMS.ino

[Ev8]

Thanks Tom I was aware that you could renumber them but didn’t realise they were identified by number and not unique id’s, and figured as I only had slaves from 5 module packs I’d end up with a duplicated Id, I’ll have to take a proper look at the code

[FFMan]

or use a teensy and put then on separate can channels