Which wiring diameter does the Tesla SDU Rear Unit have? I got some 50mm² cables with fitting connectors, but they they FJB Side on them.
I will add the information to the wiki, if somebody can confirm.
SDU HV Wiring
-
alexbeatle
- Posts: 277
- Joined: Sun Jan 03, 2021 6:12 am
- Has thanked: 71 times
- Been thanked: 29 times
Re: SDU HV Wiring
My cable came from the 70d model s. It uses 35mm2 cable. See attached.
- Attachments
-
-
Re: SDU HV Wiring
Does somebody know the cable size from the rapid splitter to the charger and to the front junction box / front sdu ? The cable to the rear LdU are according to Weber 50sqmm cables . From charge port to obc as well 50sqmm.
I am thinking to purchase the harness to use it fully in my project .
I am thinking to purchase the harness to use it fully in my project .
- Attachments
-
- IMG_5727.jpeg (19.19 KiB) Viewed 4899 times
-
jason_arnold
- Posts: 24
- Joined: Wed Sep 11, 2019 4:42 pm
- Location: Canada
- Has thanked: 4 times
- Been thanked: 2 times
Re: SDU HV Wiring
FWIW, we have the older version of this (1054500-10-E). The shorter sets of leads (one ending in spades, and the other with Rosenberger HPK ends) are 35mm2; the longer lead (again, with Rosenberger HPK ends) is 50mm2.
We also used a 1050805-10-F cable assembly (which has a 450A inline fuse) in a project and found it's 35mm2 throughout.
We also used a 1050805-10-F cable assembly (which has a 450A inline fuse) in a project and found it's 35mm2 throughout.