https://github.com/damienmaguire/8HP-TCU/tree/main
I did intend to use my '97 E39 as the test vehicle for this project but might use my 2008 E92 instead. Will see ...
OI 8HP TCU Project
-
Jack Bauer
- Posts: 3660
- Joined: Wed Dec 12, 2018 5:24 pm
- Location: Ireland
- Has thanked: 10 times
- Been thanked: 333 times
- Contact:
OI 8HP TCU Project
Finally got a github repo setup for my ZF 8HP controller project. Primary goal is to control the valve block in the GA8P75HZ gearbox for EV conversions. Should work also with traditional ICE 8HP setups.
https://github.com/damienmaguire/8HP-TCU/tree/main
I did intend to use my '97 E39 as the test vehicle for this project but might use my 2008 E92 instead. Will see ...
https://github.com/damienmaguire/8HP-TCU/tree/main
I did intend to use my '97 E39 as the test vehicle for this project but might use my 2008 E92 instead. Will see ...
I'm going to need a hacksaw
-
Jack Bauer
- Posts: 3660
- Joined: Wed Dec 12, 2018 5:24 pm
- Location: Ireland
- Has thanked: 10 times
- Been thanked: 333 times
- Contact: