Which board is better to use?
Which board is better to use?
Hello. I have a task to create an electric buggy. I want to use the native battery and inverter from the nissan leaf 1 gen. I need a slow charging function from the native connector and about 50 kW of power on the engine. Which of the boards can use these functions? Please do not be angry, I am new to this forum and I use a translator to communicate with you. Thank you
-
LRBen
- Posts: 573
- Joined: Thu Jul 04, 2019 6:35 pm
- Location: Somerset, UK
- Has thanked: 76 times
- Been thanked: 220 times
Re: Which board is better to use?
Zombieverter board will work for that just fine. Plenty of documentation on here and the wiki as well for running a leaf setup.
-
Bratitude
- Posts: 997
- Joined: Thu Jan 02, 2020 7:35 pm
- Location: Canada
- Has thanked: 174 times
- Been thanked: 359 times
- Contact:
Re: Which board is better to use?
There is no controller available that will run the gen 1 Lea on board charger.
The zombiverter will run the gen1 leaf motor+inverter
And dose CHAdeMO
but dose not run the gen1 leaf charger
The zombiverter will run the gen1 leaf motor+inverter
And dose CHAdeMO
but dose not run the gen1 leaf charger
https://bratindustries.net/ leaf motor couplers, adapter plates, custom drive train components
-
tom91
- Posts: 2409
- Joined: Fri Mar 01, 2019 9:15 pm
- Location: Bristol
- Has thanked: 207 times
- Been thanked: 569 times
Re: Which board is better to use?
Where you getting this info from? I do not believe this to be the case.
-
Jacobsmess
- Posts: 748
- Joined: Thu Mar 02, 2023 1:30 pm
- Location: Uk
- Has thanked: 403 times
- Been thanked: 116 times
Re: Which board is better to use?
I vaguely remember one of Damiens videos on the stack mentioning something along the lines of this. May well be legacy information.