Tesla SDU / FDU

Topics concerning the Tesla front and rear drive unit drop-in board
Post Reply
User avatar
bewo
Posts: 29
Joined: Sun Jan 14, 2024 9:06 pm
Location: Germany NRW
Has thanked: 6 times
Been thanked: 3 times

Tesla SDU / FDU

Post by bewo »

Hi guys,
I have a question regarding to Teslas SDU and FDU with the different part numbers 1037000-00-F and 1035000-00-F.
Does anyone know whether the inverters are identical? So the electronic itself?
Long story short. I'm searching for an inverter for the 1035 an the question is, can I use an inverter for the 1037 as well?
User avatar
johu
Site Admin
Posts: 6969
Joined: Thu Nov 08, 2018 10:52 pm
Location: Kassel/Germany
Has thanked: 455 times
Been thanked: 1771 times
Contact:

Re: Tesla SDU / FDU

Post by johu »

I don't know about these part number specifically but one of my customers found there are different length motor cables. When too long you can recrimp them, when too short... hmm
Support R/D and forum on Patreon: https://patreon.com/openinverter - Subscribe on odysee: https://odysee.com/@openinverter:9
User avatar
bewo
Posts: 29
Joined: Sun Jan 14, 2024 9:06 pm
Location: Germany NRW
Has thanked: 6 times
Been thanked: 3 times

Re: Tesla SDU / FDU

Post by bewo »

Thank you Johannes for the information. I don't have an FDU in my hand, but extended my research. It seems that the inverter housing is the same for SDU and FDU. If you look from the side you see that the housing is turned in a 90° angle.
And as mentioned in an other article here in the forum the electronic is the same and for that the SDU drop-in logic board works for both engines.

In this video you see the SDU electronic:


And here you can find the FDU electronic:


In comparison you are right Johannes, the length of the cables are different.
Post Reply