Supercharging a Tesla standalone battery pack
-
hanskraayeveld
- Posts: 56
- Joined: Fri Oct 03, 2025 6:50 am
- Has thanked: 1 time
- Been thanked: 5 times
-
hanskraayeveld
- Posts: 56
- Joined: Fri Oct 03, 2025 6:50 am
- Has thanked: 1 time
- Been thanked: 5 times
Re: Supercharging a Tesla standalone battery pack
It can also work with gen3 obc's.
No need for can-redeploy. Can also work with v2 v3 superchargers with ccs adapter.
No need for can-redeploy. Can also work with v2 v3 superchargers with ccs adapter.
-
hanskraayeveld
- Posts: 56
- Joined: Fri Oct 03, 2025 6:50 am
- Has thanked: 1 time
- Been thanked: 5 times
Re: Supercharging a Tesla standalone battery pack
Its a 14 modules 75 kWh battery with 83 bricks.
1 module, module 7 has 5 bricks.
-
hanskraayeveld
- Posts: 56
- Joined: Fri Oct 03, 2025 6:50 am
- Has thanked: 1 time
- Been thanked: 5 times
-
manny
- Posts: 164
- Joined: Sun Jan 23, 2022 4:15 pm
- Location: Netherlands
- Has thanked: 38 times
- Been thanked: 125 times
Re: Supercharging a Tesla standalone battery pack
Cool.
So parts needed battery, charger, hv junction box and charge port?
What does the controller do exactly?
So parts needed battery, charger, hv junction box and charge port?
What does the controller do exactly?
[DRIVING] Citroen Saxo electrique
- Volvo ERAD motor, XC90 inverter/DCDC (custom OI board)
- PSA battery (50kWh)
- Foccci and MG ZS charger 6.6kW
- Zombie VCU
-
hanskraayeveld
- Posts: 56
- Joined: Fri Oct 03, 2025 6:50 am
- Has thanked: 1 time
- Been thanked: 5 times
Re: Supercharging a Tesla standalone battery pack
The controller sends the missing can data from some (HV) components.
And the VIN number for the payment.
And the VIN number for the payment.
Re: Supercharging a Tesla standalone battery pack
Cool project.
Right now I’m trying to make something similar, but I’m stuck with the CAN BUS communication. I have outdated Model S .dbc file and trying to figure out necessary HV components frame IDs. Maybe you can share .dbc file You are using?
Right now I’m trying to make something similar, but I’m stuck with the CAN BUS communication. I have outdated Model S .dbc file and trying to figure out necessary HV components frame IDs. Maybe you can share .dbc file You are using?