Main Page Old: Difference between revisions
Jump to navigation
Jump to search
(Change link to main board v3 instead of older v2 board) |
|||
| Line 3: | Line 3: | ||
Everyone registered at the forum can login here with the same username and password and can make changes. | Everyone registered at the forum can login here with the same username and password and can make changes. | ||
The open inverter project consists of some reference designs for the <u>[[Main Board Version | The open inverter project consists of some reference designs for the <u>[[Main Board Version 3|control hardware]]</u> using an STM32F103, the inverter firmware, and an easy to use web interface. Other hardware variants include <u>[https://github.com/damienmaguire/ drop in boards for Tesla]</u> small and large drive units. | ||
If you have received a kit you are probably looking for <u>[[Schematics and Instructions|build instructions]]</u>. | If you have received a kit you are probably looking for <u>[[Schematics and Instructions|build instructions]]</u>. | ||
Revision as of 10:28, 10 March 2020
Welcome to the openinverter.org Wiki Site.
Everyone registered at the forum can login here with the same username and password and can make changes.
The open inverter project consists of some reference designs for the control hardware using an STM32F103, the inverter firmware, and an easy to use web interface. Other hardware variants include drop in boards for Tesla small and large drive units.
If you have received a kit you are probably looking for build instructions.
If you want to tune your inverter check the parameter description.
You might also want to set up CAN communication or use the inverter as a battery charger also.
General
- Common Inverter FAQ - questions common to all hardware variants
Open Inverter Hardware
- Main Board Version 3
- Main Board Version 2
- Main Board Version 1
- Sense Boards
- Gate Driver
- 4-cell BMS
- Hardware Theory of Operation
- Legacy Sensor Board
Open Inverter Software
- Software Theory of Operation
- CAN communication
- Web Interface
- Parameters
- Downloads
- Errors
- Configuration Files
- Battery Charging
- Features
Open Inverter Kits
- Using FOC Software
- Schematics and Instructions - for the "vanilla" inverter kit.
- Nissan Leaf Gen2 Board
- Toyota Prius Gen2 Board
- Toyota Prius Gen3 Board
- Lexus GS450h Inverter
Open Inverter CAN std.
Open Inverter Tesla Boards
Ford Ranger TIM inverter
- Introduction
- Schematics and connector pinout
- Modifications to original wiring
- Hardware installation
- Where to buy
Conversion Projects
OEM Parts
- Nissan Leaf BMS
- Tesla Model S/X Charger
- Tesla Model S/X Small Front Drive Unit ("SDU")
- Tesla Model S/X Small Rear Drive Unit ("SDU")
- Tesla Model S/X Large Rear Drive Unit ("LDU")
- Tesla Model 3 Battery
- Tesla Model 3 Charger/DCDC ("PCS")
- Tesla Model 3 Front Drive Unit
- Tesla Model 3 Rear Drive Unit
- Tesla CAD Models