Simp BMS

Jiyar · Post by **Jiyar** » Sun Mar 02, 2025 11:57 am

mane2 wrote: ↑Sun Mar 02, 2025 11:01 am If you clone the repo, open it with VS Code and have PlatformIO installed, it pulls the required libraries and compiles successfully without any modifications. Just tested.

Thank you for quick response, I'll do that

johnsongt350 · Post by **johnsongt350** » Sat Apr 12, 2025 7:47 pm

Hi I am having an issue getting my car to charge. I'm using the simp bms v2 and a simp charge. I have an elkon 6.6 charger. I have the charger wired behind contactors.
Please see the current settings on the dashboard. Let me know if you see anything I'm missing.

tom91 · Post by **tom91** » Sat Apr 12, 2025 8:17 pm

? post some more info on you issue.

johnsongt350 · Post by **johnsongt350** » Sat Apr 12, 2025 8:35 pm

When I plug In the EVSE it indicates ready on the EVSE. Nothing happens, no fan, no charge. I have 12volts at the simp charge, good ground. All connections are secure. I have the proper resister in place as well. I was wondering if any of my parameters need to be adjusted in the photos above

tom91 · Post by **tom91** » Sat Apr 12, 2025 8:41 pm

This is not the SimpBMS but Vero-BMS I believe reach out directly to them. https://veroelectric.com/product/vero-bms-v2

johnsongt350 · Post by **johnsongt350** » Sat Apr 12, 2025 8:44 pm

Ok thanks

Simp BMS

Re: Simp BMS

Re: Simp BMS

Re: Simp BMS

Re: Simp BMS

Re: Simp BMS

Re: Simp BMS