Jack Bauer wrote: ↑Thu May 28, 2020 8:28 am There will be an accessory pack for the gen 3 available soon including the ampseal board, brass terminals for hv connection and a few other bits.

I will be waiting for final release and compability approvement to my assembly

So am I off designing a Yaris/Auris board then ?:)


if you are going to say that this hardware is incompatible with your board, then yes: D

assy
https://sun9-66.userapi.com/c857324/v857324705/bf048/kc8MawQdvBM.jpg

logic
https://sun9-16.userapi.com/c857324/v857324705/bf051/cQeczHgMr3E.jpg ...

suitable when the board hangs on two bolts and the wires are not in the clips, vibration is a scary force ;)


When I offered up a paper printout of the replacement logic board to the similarly sized Yaris internal chassis it looked entirely feasible to drill through and bolt some PCB spacers ...

How much is the difference between the aqua board and the prius?


https://sun9-69.userapi.com/c857728/v857728165/14e4eb/7QxZsSl1zqU.jpg
https://sun9-17.userapi.com/c857728/v857728165/14e4e1/z-oN9w0YnzA.jpg



* unsuitable when the board hangs on two bolts and the wires are not in the clips ...

Iv made some mess, as I understand the corrections so that nothing props are already made?
https://sun9-127.userapi.com/c857728/v857728248/14d885/shf7l6gPt6Y.jpg

in general, everything is fine


and a question: will there be new deliveries with a modification for aqua such as hole offset and flat ...

nope, that's has no worked. With replace to a luxembourg address or any other parameters...

Hi! I need support stacked even before order


clicking on "CONTINUE" does no effect...

am I dumb?

*I cant create an account

Boards now available on the webshop once again:
https://www.evbmw.com/index.php/evbmw-webshop

Im very glad that is succeeded, about a year of waiting but im been patient. Not matter that it even will not be stand bolt-on, not of sure if I can reroute it under my implemetation needs of AQUA's ...

Damien - as you're going to modify the board (moving capacitor and inductor) is there a chance you will add Aquinox modifications (additional holes for screws) to fit also Yaris inverter?


Yes, it’s not an unnecessary idea, and in addition to offset holes, some connectors are lying instead of ...

Damn, I want it.shut up and take my money! How much by the way?

* I was drunk and excited

Yeah but how do I know that you didn’t get rolled up, already got prototypes and are not in a hurry with implementation?
I think everyone is unbearable and cant wait

Aquinax wrote: ↑Sat Apr 27, 2019 1:10 pm

I hope the solution not only of my alternative problem will be in the repo

martii wrote: ↑Sun Jan 05, 2020 9:42 pm It looks like Damien is too busy to update github at the moment

I don’t understand anything, the repositories increased from 34x to 37x, but I do not see new ones ...

when is the next board revision expected? I will have to start the season on the oil smoker if I don’t do anything right now. The manual says that the Prius C has a 144-volt battery, is this true? and. why some people don’t like the toyota native connector, why the ampseal?

johnspark wrote: ↑Thu May 09, 2019 10:27 am i have a file but it is 27 meg is size. this program won't let me save it here unfortunately.

use google disk, upload and place shared link here

If this first version isn't stable?
Damien hasn't yet driven a car with this inverter and therefore you can expect change in the hardware and/or software. If you're an end user then you should probably wait until some more progress is made and we can offer some support (especially if you're ...

I need components to order or assembly order. I was telling about UPload to store I think you'll need to wait until Damien releases a stable version of the design and someone has time to create the BOM. It's very early in the design process and things are bound to change.

If you're desperate ...

All information that is available is on Damien's GitHub. Have you created a BOM that you want uploaded to his GitHub, or do you need a BOM that you wish to download?

If you tell us where you are based then we might be able to find a local engineer that can help you 8-)


I need components to ...

You may need to make sure they get the inversion correct on the power planes.


what is this means?

in truth, I don’t really want to solder myself.
I can not imagine where to order the components, dazzling in eyes and my hands are shaking.
and after that i look like this
https://pp.userapi.com ...

Here is a tutorial on producing gerbers with designspark :
https://designspark.zendesk.com/hc/en-us/articles/115004812433-How-do-I-produce-Gerber-files-

thanks, I have already dealt with this board outline problem.

Next I need to order the fabrication, even better assembly, but it is expensive ...

Hi everyone! I finished rerouting due to the specifics of my particular instance, I hope it will work as intended...
Now how to generate gerber correctly? I got into this difficult thing as a rookie, understanding only superficial processes.
https://pp.userapi.com/c850520/v850520005/10905b ...

Hey Damien, this is looking really good!

So I started to check the PCB layout against my inverter. I found that my board is 154mm x 143mm, so it is shorter on the edge nearest the current sensors.

Prius Gen 3 Invertor Board.png

Not to worry, I think the new board will fit, I'll just have to ...