These are a few measurements that interested me.
I got them from TOMS STL file.
Unfortunately, I couldn't measure them directly in GrabCAD.
The measurements are slightly rounded up to full centimetres.
I do not guarantee their accuracy :-)
Anyone interested can check this for themselves. MGR22.jpg ...

Hello Greg,
I follow your work with great interest!
Could you provide us with more dimensions (external dimensions) for the motor?

And another question: Do you have any expectations regarding the top speed for a given wheel diameter and battery voltage? Or are you just waiting to see how things ...

Hello,
That's an interesting conversion.

I'm also thinking about this engine.

I'm not sure about the engine position in my project, so I'm asking you: Are you sure that this installation position for the engine will work in the long term?

The Mitsubishi has a different installation position in ...

Thanks very much for sharing your work
aot93 and arber333

Would you still have any of the PCBs available?

I’m looking forward to testing all this out!


Good news is the teensy 4.1 seems to be back in general stock.

Bad news is the 3.x ones are still a way off by the looks of things, which ...

I am following the work here with great interest.

And I thank you very much for the extensive documentation

I have/had also planned to use the Prius drive and had also bought the drive.
However, I have read that the drive delivers little speed. Unfortunately, high speeds have not yet been achieved ...

According to

https://openinverter.org/wiki/Toyota/Le ... axle_Motor

there are several MGR

May I ask which one is installed here?
Q211
from
Lexus RX450h GYL15
Lexus RX450h GYL25

Regards

No problem with the answer now.
You had already answered me on YouTube.

Thank you for the further information.
The other problems (pump) can certainly be fixed.
I had also read that you don't necessarily need power steering on such a light vehicle....

Hello everyone,
First of all, I am a beginner when it comes to ev conversion.
I am considering converting a light (600kg) vehicle. This vehicle has an ICE engine with these data
power 20 kW @ 6500 rpm
torque 40 Nm @ 3800 rpm
displacement 600 ccm.
At 6000 rpm (ICE with gearbox in fourth gear) the ...

Hello Johannes,
thank you very much for the report on your experiences with the car!

If it's not too much trouble, a short video about the acceleration would be helpful (dashboard). That would be nice, because you wrote elsewhere that the acceleration is poor from 50 km/h upwards. I will also need ...

Hello
thanks for the quick reply Johannes!
And many thanks for your offer, Chris.
I live near Oldenburg/Bremen.
And I already ordered Prius Gen 2 inverter and transmissin yesterday morning here:

https://www.partan.de/de/car/toyota/#q=&categories=&manufacturers=&models=5066&year_from=2006&year_to ...

Hello everyone.
I am new here.
My name is Carsten, from North West Germany.
My background: I am a mechanical engineer with little knowledge of electrical engineering. I am a 60 year old petrol head. I have already rebuilt/replaced motors and also used a new motor controller (Megasquirt). I also have ...